SKYDAS STANDART 2

SKYDAS Standart 2 is the lowest security class door available from SKYDAS range that ideally upgrades the protection of low and medium risk areas (apartments, cottages).
This door was engineered and designed applying the knowledge of all possible ways and methods of burglary when basic tools are used during the assault. Its qualities and ratings were tested and approved by the experts at IFT Rosenheim laboratory in Germany. SKYDAS Standart 2 was granted the certificate of the 2nd security class (RC2) according to the latest EN 1627:2011 standard.
SKYDAS STANDART 2 is distinguished by excellent sound and thermal insulation and therefore is suitable both for apartments and private houses (using the material suitable for the outdoor conditions).
The door can be non-standard size, bespoke design and fire resistant.

Safe

Specially bent L-shaped 100 mm wide door frame is not only wider than that of ordinary armoured door, but also has 6 bending edges and thus is stronger than rectangular or tube frame, which have only 4 bending edges. Moreover, the frame is fixed in the opening by 16 plugs, which are protected from cutting by steel liners of 24 mm, thus there is no need to fix the door in concrete. Internal leaf construction is reinforced by rigid edges that do not allow deforming the door easily during burglary. The locks installed in this door model must be no lower than 3rd security class and one of them must be protected by a drilling resistant plate.
On the hinges side there are 6 protective pins that do not allow dislodging the door leaf if the hinges are cut. Two pins (16 mm Ø) roll on bearings and therefore are difficult to cut. The other 4 pins (12 mm Ø) are stable.

  Saves the heat in your home

As the bent profile leaf structure does not have closed cavities, it can be completely thermally insulated by 50 mm rock wool. The L-shaped bent frame and threshold ensure exclusive tightness as an additional seal is applied to the entire perimeter (two seals in total).
Thermal transmittance of SKYDAS STANDART 2 is 1.3 W/(m2–K), i.e. the same like of 6-chamber plastic windows (the lower the transmittance, the more heat is held in). Therefore, this door is suitable not only for an apartment, but also for a private house (using the materials suitable for outdoor conditions).

Tight and good sound insulation

Due to the above mentioned full thermal insulation of the door construction, the sound insulation of the door SKYDAS STANDART 2 is 41 dB.

Fire resistant

Due to the above mentioned full thermal insulation of the door construction, the sound insulation of the door SKYDAS STANDART 2 is 41 dB.
This door is especially tight and therefore, perfectly shuts out the odours and smoke from the outside.

Durable and lasting, convenient to use

All SKYDAS doors are manufactured by especially precise programmed machines Amada, which can process metal with the precision of 0.1 mm, therefore, their construction is precisely accurate and straight. As hinges with supporting bearings are used, the doors are easy to open and close, despite of heavier weight characteristic to metal doors. The tests indicated that after 200,000 cycles of opening and closing, the construction of the door remained completely intact.

As the internal construction of the door has no closed cavities, the entire metal construction is covered in powder coating, which ensures long-term surface protection from corrosion.

The door finish is usually made of painted or PVC laminated MDF or Umidax-HLS board. Polyurethane paint is resistant to moisture, discolouring, cracking, and peeling; and PVC laminated MDF or Umidax-HLS board is especially resistant to scratching and chipping of corners.
Under necessity, door finish can be easily replaced.

Simple to take care of

Painted or PVC laminated door finish does not require any specific care and is easy to clean.

Design possibilities

Choose a design from nearly 200 our finish carvings or we will manufacture a door according to an individual project prepared by an architect or us.

Technical data

The door is manufactured precisely according to necessary measurements.
Important:
Burglar resistance certificate is applicable to door measurements 2100×980 mm. The height and width of the door can be increased by 10% or reduced by 20%.
Fire resistance EI45 of the fire resistant door is applicable to measurements up to 2100x 980 mm. If the height or width is increased by 15% (but not more than 20% of the total area), fire resistance will be EI30.